Bangladesh has security tag manufacturers, garment accessories suppliers, EAS equipment distributors, and retail security system installers. The right supplier depends on whether you need bulk tags for export garments, a complete retail anti-theft system, RFID inventory support, or replacement tags for an existing store installation.
Security alarm tags form one part of an Electronic Article Surveillance system. A standard EAS setup combines a hard tag or soft label attached to the product with antennas placed near the retail entrance or exit. The antennas detect an active tag and alert store staff when protected merchandise passes through without authorized removal or deactivation.
The security tag supply chain matters to Bangladesh because garment production operates at a significant scale. According to the Bangladesh Garment Manufacturers and Exporters Association, Ready-Made Garment exports reached USD 38.70 billion in the 2025 to 2026 fiscal year and represented 80.62% of Bangladesh’s total exports.
Retail loss prevention also remains a serious concern for global apparel brands. The National Retail Federation reported an 18% increase in the average number of shoplifting incidents in 2024 compared with 2023 among the retailers included in its 2025 study.
This guide reviews 10 security tag suppliers in Bangladesh based on public company information, product range, garment or retail relevance, technical support, and bulk sourcing suitability. The numbering supports easy navigation. It does not represent an independently audited performance ranking.
How Were the Security Tag Suppliers Selected for This List?
The suppliers were selected by reviewing official websites, product catalogues, trade association listings, and publicly available company information. Priority was given to companies that clearly publish security tag products or EAS system capabilities relevant to garment factories, buying houses, apparel exporters, fashion brands, and retail businesses.
The following factors shaped the supplier shortlist:
- Relevant security tag range: The supplier needed to publish products such as hard tags, soft labels, round tags, square tags, pencil tags, lanyard tags, RF tags, AM tags, RFID tags, detachers, or deactivation equipment.
- Garment or retail industry focus: Suppliers received stronger consideration when their products were clearly intended for garments, footwear, fashion retail, supermarkets, chain stores, or export-oriented apparel production.
- B2B order suitability: The evaluation considered whether the company appeared capable of handling wholesale, manufacturing, import, distribution, installation, or repeat commercial orders.
- Technical information: Suppliers that published technology, frequency, attachment type, tag dimensions, system components, or compatibility details provided buyers with a stronger starting point.
- Sampling and customization: Garment buyers often need a physical sample, buyer-specific color, custom attachment, approved lock, or matched product design before bulk production begins.
- EAS system support: Retail buyers may require antennas, tag detachers, soft-label deactivators, installation, and after-sales support in addition to the tags themselves.
- Public business transparency: A current company website, physical address, contact details, industry membership, or detailed product catalogue strengthened the supplier’s inclusion.
Public information cannot confirm every supplier’s current stock, factory capacity, quality performance, or lead time. Buyers should complete their own supplier verification before issuing a purchase order.
Top 10 Security Tag Suppliers in Bangladesh
The following list includes two main supplier categories. Garment-focused suppliers serve factories, exporters, and buying houses that need tags for production or source tagging. Retail system suppliers provide tags together with EAS gates, detachers, deactivators, and installation support.
1. Axisory
Axisory is a B2B garment accessories manufacturer and supplier based in Dhaka. The company serves garment factories, buying houses, apparel exporters, fashion brands, lingerie manufacturers, kidswear producers, and women’s wear manufacturers.
Axisory supplies five main security alarm tag formats:
- Round tags
- Fish tags
- Square tags
- Lanyard tags
- Super tags
The product range is intended for bulk garment production, export finishing, and buyer-specific retail security requirements. Axisory focuses on production-ready garment accessories rather than complete retail gate installation.
Best suited for: Garment factories, buying houses, apparel exporters, and fashion brands sourcing security tags in bulk.
Main sourcing advantage: Buyers can discuss tag requirements alongside other garment accessories through one B2B supplier. Axisory also supplies garment lace and handcrafted accessories.
Quality and service focus: Axisory states that every order undergoes 100% pre-shipment quality inspection. Buyers also receive one account contact throughout the sourcing process and a quotation within 24 hours.
Buyers should confirm: The required EAS technology, retail system compatibility, pin type, locking mechanism, color, order quantity, packaging, and delivery schedule.
2. Alif Alarm Tag Bangladesh
Alif Alarm Tag Bangladesh manufactures and exports security tags and garment accessories. Its published range includes RF, AM, and RFID hard tags, as well as RF and AM soft label tags. The company also publishes products such as fish tags, super tags, and customized hard tags.
Alif publishes daily production capacity figures for several product categories. Its website lists capacity for RF soft labels, AM soft labels, paper tags, and RF, AM, and RFID super hard tags. These figures are supplier-published and should be verified during commercial evaluation.
Alif Alarm Tag Bangladesh is also listed as an active member of the Bangladesh Garments Accessories and Packaging Manufacturers and Exporters Association.
Best suited for: Export-oriented garment factories, buying houses, international apparel orders, and buyers requiring several EAS technologies.
Published capabilities:
- RF hard tags
- AM hard tags
- RFID hard tags
- RF soft labels
- AM soft labels
- Fish tags
- Super tags
- Customized tag colors and specifications
Main sourcing advantage: The company provides one of the broader publicly documented security tag ranges among Bangladesh-based manufacturers.
Buyers should confirm: The required frequency, RFID standard, lock strength, approved detacher, raw material, daily capacity for the selected product, and repeat-order component consistency.
3. Gen20 Solution
Gen20 Solution describes itself as a bonded garment accessories manufacturer specializing in security and protection products. Its published product categories include AM and RF chips, RF and AM labels, and hard tags.
The Bangladesh Garments Accessories and Packaging Manufacturers and Exporters Association lists Gen20 Solution as an active member and identifies RFID tags as one of its products. The directory also provides separate office and factory addresses.
A bonded accessories manufacturer may be relevant to export-oriented factories because the supplier works within a formal garment accessories production environment. However, buyers should still verify the specific bonded facility status, documentation process, and product capacity required for the order.
Best suited for: Export garment factories, buying houses, and buyers sourcing RF, AM, or RFID-related tag components.
Published capabilities:
- AM and RF chips
- RF and AM labels
- Hard tags
- RFID tags
- Garment security products
Main sourcing advantage: Gen20 combines garment accessories manufacturing with a focused security product category.
Buyers should confirm: Current product models, production capacity, sample lead time, buyer approval process, frequency testing, packaging, and export documentation support.
4. Nasir & Sons
Nasir & Sons presents itself as a manufacturer of security alarm tags and buttons for the garment industry. The company states that it supplies products according to buyer patterns and checks conformity with customer requirements before shipment.
Its published product information includes super hard tags, RF mini square hard tags, clothing alarm tags, alarm hang tags, woven security garment labels, and pencil hard tags. The company also states that it provides samples according to buyer designs.
The buyer-pattern approach may be useful when a fashion brand or retailer nominates a specific tag model. Garment factories often need to match an approved physical sample instead of purchasing a standard tag based only on appearance.
Best suited for: Garment factories, buying houses, and exporters working with buyer-nominated security tags.
Published capabilities:
- Super hard tags
- RF mini square tags
- Clothing alarm tags
- Garment alarm hang tags
- Woven security labels
- Pencil tags
- Sample development
Main sourcing advantage: The company focuses on matching products with buyer patterns and garment accessory requirements.
Buyers should confirm: The current factory setup, production capacity, frequency testing method, lock specification, sample charges, warranty statements, and bulk quality process.
5. Retail Solution
Retail Solution is an EAS security product and system provider serving retail businesses in Bangladesh. The company offers security gates, hard tags, soft labels, detachers, deactivators, and installation support.
Its published hard-tag range includes pencil tags, mini square tags, and lanyard tags. Retail Solution also supplies RF and AM antennas, soft label deactivators, tag detectors, and magnetic detachers.
Retail Solution is more suitable for retail stores than factories that only need thousands of source-applied garment tags. Its wider equipment range allows a retailer to discuss the complete EAS system rather than buying tags without confirming gate compatibility.
Best suited for: Fashion stores, supermarkets, pharmacies, chain shops, and retailers installing or expanding an EAS system.
Published capabilities:
- AM and RF EAS gates
- Pencil tags
- Mini square tags
- Lanyard tags
- Soft labels
- Detachers
- Deactivators
- Installation support
Main sourcing advantage: Retailers can source the tags, detection gates, checkout equipment, and technical service from one system provider.
Buyers should confirm: Store entrance width, electrical interference, floor wiring, gate frequency, detection range, warranty, technician availability, and future tag supply.
6. Trimatrik
Trimatrik supplies EAS systems and related security products in Bangladesh. Its catalogue includes RF soft tags, RF mini hard tags, AM and RF security gates, tag removers, deactivators, and products from brands such as Sensormatic, Checkpoint, and Verbex.
The published catalogue includes RF soft labels operating at 8.2 MHz, AM gates operating at 58 KHz, RF mini tags, Checkpoint antennas, and tag-removal equipment.
Trimatrik is connected with a broader security and technology product business. Its range may suit retailers that need equipment selection and system installation rather than a garment factory seeking only buyer-approved tags.
Best suited for: Retail stores, supermarkets, shopping outlets, libraries, and businesses requiring a complete EAS setup.
Published capabilities:
- RF hard tags
- RF soft labels
- AM and RF gates
- Tag removers
- Tag recheck devices
- Deactivators
- Retail security antennas
- Technical installation
Main sourcing advantage: Buyers can compare different EAS technologies, system components, and equipment brands through one supplier.
Buyers should confirm: Product stock, brand authenticity, installation scope, service warranty, detection test, replacement policy, and compatibility with existing tags.
7. Security Tag BD
Security Tag BD presents itself as a security tag importer and wholesaler in Bangladesh. Its published range includes RF and AM security tags, RFID-related products, hard tags, soft labels, anti-theft pins, mini square tags, pencil tags, lanyard tags, and round golf tags.
The supplier lists products for garments, textiles, apparel, logistics, inventory operations, and retail security. It also publishes after-sales support and nationwide delivery as part of its service offering.
Security Tag BD is a sourcing and distribution option rather than a publicly identified local manufacturer. That difference matters when a buyer needs custom production, long-term component control, or factory-level compliance documentation.
Best suited for: Retailers, garment businesses, wholesalers, and buyers seeking imported security tags or replacement products.
Published capabilities:
- AM and RF pencil tags
- Mini square tags
- Round golf tags
- Lanyard tags
- AM soft labels
- RF soft labels
- RFID-related tags
- Pins and tag accessories
Main sourcing advantage: The company publishes a focused catalogue covering several hard tag, soft tag, and attachment options.
Buyers should confirm: Product origin, manufacturer, import lead time, stock availability, replacement consistency, warranty, and compatibility with the existing EAS system.
8. GCTL Security
Germany Computer and Telecom Limited, operating through GCTL Security, supplies EAS products as part of a wider entrance security and technology portfolio. The company is based in Dhaka and publishes separate categories for RF hard tags, AM hard tags, RF soft tags, AM soft tags, and security systems.
Its RF hard-tag catalogue includes lanyard tags, dome tags, round tags, large square tags, optical tags, detachers, and label deactivators.
GCTL Security appears more relevant to retailers and commercial security projects than to export garment factories requiring nominated accessory production. Its wider technical portfolio may support businesses that need integrated security equipment.
Best suited for: Retail stores, commercial facilities, fashion outlets, and buyers sourcing EAS tags with related security equipment.
Published capabilities:
- RF hard tags
- AM hard tags
- RF soft tags
- AM soft tags
- Lanyard tags
- Square tags
- Round tags
- Detachers
- Label deactivators
- EAS detection systems
Main sourcing advantage: Buyers can access several tag formats and entrance security products through one technology supplier.
Buyers should confirm: Installation service, equipment warranty, product brand, country of origin, tag availability, and replacement lead time.
9. Montrims Limited
Montrims Limited is a garment accessories manufacturer that provides backward linkage support to export-oriented garment industries. The company publishes RF security tags for chain stores as part of its accessory range.
Montrims states that its RF security tags are designed for retail merchandise and chain-shop loss prevention. The company also links its products with garment production and export-oriented accessory supply.
The published page contains limited technical details compared with some specialist EAS suppliers. Buyers should request a complete catalogue before deciding whether Montrims can meet the required tag shape, frequency, lock, and order volume.
Best suited for: Garment factories and exporters that prefer sourcing from a broader garment accessories manufacturer.
Published capabilities:
- RF security tags
- Garment accessories
- Export-oriented accessory production
- Chain-shop security applications
Main sourcing advantage: The supplier connects security tags with a wider garment accessories manufacturing operation.
Buyers should confirm: Available tag models, frequency, production capacity, customization, certifications applicable to the product, sample process, and quality testing.
10. Himaloy Engineering
Himaloy Engineering supplies EAS security systems and related equipment in Bangladesh. Its published product category includes RF security antennas, EAS security tags, tag detachers, handheld detachers, and installation support.
The company focuses on engineering, access-control products, and complete system installation. This makes it more suitable for retail businesses that need entrance security equipment than factories sourcing buyer-nominated tags for garment production.
Himaloy publishes RF antenna systems operating at 8.2 MHz and offers security system configurations for different project requirements. Product pricing and specifications can change, so buyers should obtain a current written quotation.
Best suited for: Retail stores, commercial facilities, and buyers requiring EAS system installation.
Published capabilities:
- RF EAS antennas
- Security tags
- Tag detachers
- Handheld detachers
- System installation
- Engineering support
Main sourcing advantage: Buyers can combine equipment purchase with installation and technical assistance.
Buyers should confirm: Site survey requirements, antenna coverage, installation cost, warranty, maintenance response, replacement parts, and tag supply terms.
How Do the Top Security Tag Suppliers in Bangladesh Compare?
The suppliers serve different buyer groups. Axisory, Alif Alarm Tag Bangladesh, Gen20 Solution, Nasir & Sons, and Montrims have stronger connections with garment accessories or export production. Retail Solution, Trimatrik, GCTL Security, and Himaloy focus more heavily on complete retail EAS systems. Security Tag BD operates mainly as an importer and wholesaler.
| Supplier | Supplier Type | Published Security Products | Best Fit | Public Information Level |
| Axisory | B2B garment accessories manufacturer and supplier | Round, fish, square, lanyard, and super tags | Garment factories, buying houses, and exporters | Strong company and product information |
| Alif Alarm Tag Bangladesh | Security tag manufacturer and exporter | RF, AM, RFID hard tags, and soft labels | Large garment and multi-technology orders | Detailed product and capacity information |
| Gen20 Solution | Bonded garment accessories manufacturer | AM and RF chips, labels, hard tags, and RFID tags | Export factories and buying houses | Verified website and trade association listing |
| Nasir & Sons | Garment security tag manufacturer | Super tags, mini square tags, pencil tags, and woven labels | Buyer-nominated garment orders | Moderate product information |
| Retail Solution | EAS system supplier and installer | Gates, hard tags, soft labels, detachers, and deactivators | Retail stores and supermarkets | Detailed system catalogue |
| Trimatrik | EAS equipment distributor and installer | RF and AM gates, tags, labels, and removers | Retail security projects | Extensive public catalogue |
| Security Tag BD | Importer and wholesaler | RF, AM, RFID-related tags, labels, and pins | Retailers and stock-based buyers | Detailed focused catalogue |
| GCTL Security | Security technology supplier | RF and AM hard tags, soft tags, and equipment | Retail and commercial security | Detailed product catalogue |
| Montrims Limited | Garment accessories manufacturer | RF security tags | Export-oriented garment buyers | Moderate product information |
| Himaloy Engineering | EAS equipment and installation provider | RF gates, tags, and detachers | Retail installation projects | Detailed equipment information |
Buyers should not choose a supplier based on the number of published products alone. A smaller specialist may provide better garment specification control, while a retail system installer may provide stronger technical support for antennas and checkout equipment.
Which Security Tag Supplier Is Suitable for Your Business?
The right supplier depends on where the tag will be applied, how it will be detected, who owns the retail system, and whether the order forms part of garment production or store installation. Buyers should match the supplier’s operating model with the project rather than sending the same request to every company.
Best Fit for Garment Factories and Export Orders
Garment factories need security tags that match the buyer’s approved specification and arrive before the finishing or packing deadline. The supplier must support sampling, repeat-order consistency, bulk production, packing instructions, and factory delivery.
Axisory, Alif Alarm Tag Bangladesh, Gen20 Solution, Nasir & Sons, and Montrims Limited are the most relevant candidates in this list for garment-related sourcing.
A factory should prioritize:
- Approved sample matching
- Bulk production capability
- Buyer-nominated specifications
- Tag position instructions
- Carton packing requirements
- Repeat-order consistency
- Delivery before the shipment deadline
- Pre-shipment quality inspection
Source tagging can allow a factory to attach the security device during garment production or finishing. A global apparel manufacturer case published by GS1 describes item-level RFID tags being attached and encoded during garment production to support later supply chain use.
Best Fit for Buying Houses and Apparel Exporters
Buying houses and exporters need a supplier that provides clear technical documentation and reliable communication. The sourcing manager must often present a product specification or physical sample to the international buyer before bulk approval.
Axisory may suit buying houses that need security tags alongside other garment accessories. Alif offers a wider published range across RF, AM, and RFID. Gen20 may suit buyers who prefer an active BGAPMEA-listed bonded accessories manufacturer. Nasir & Sons may be useful for sample-based tag development.
Buying houses should request a technical data sheet containing:
- Product code
- Tag shape
- Dimensions
- Weight
- Material
- Technology
- Frequency
- Lock type
- Pin or lanyard type
- Color
- Logo or marking
- Packaging quantity
- Sample approval number
- Production lead time
Best Fit for Retail Stores and EAS System Installation
Retail stores should work with a supplier that can evaluate the complete EAS setup. A hard tag cannot protect merchandise if it does not communicate correctly with the installed gate.
Retail Solution, Trimatrik, GCTL Security, and Himaloy Engineering are stronger options for complete store installations. These companies publish gates, hard tags, soft labels, detachers, deactivators, or installation services.
Retailers should evaluate:
- Entrance width
- Number of gates
- RF or AM technology
- Store layout
- Electrical interference
- Product categories
- Hard tag and soft label quantities
- Checkout detachers
- Deactivation equipment
- Installation warranty
- Technical support response
Best Fit for RFID and Inventory Tracking Requirements
RFID supports item identification and inventory visibility when the tags work with compatible readers, software, and data standards. RFID should not be treated as another name for a standard EAS hard tag.
Alif Alarm Tag Bangladesh, Gen20 Solution, and Security Tag BD publish RFID-related products. Buyers should verify the RFID protocol, memory requirement, encoding method, read range, reader compatibility, data standard, and software integration before approval.
GS1 reports that retailers in one RFID study achieved inventory accuracy of 93% to 99%, compared with lower accuracy before implementation. The same research connected higher inventory accuracy with sales improvements of 1.5% to 5.5%.
RFID requires more than the physical tag. A complete project may involve:
- Item identification standards
- Tag encoding
- Reader hardware
- Warehouse portals
- Store readers
- Inventory software
- Data integration
- Staff training
- Privacy and data controls
How to Choose the Right Security Tag Supplier
The right supplier should provide a tag that works with the intended detection system, protects the garment without damage, matches the approved sample, and remains consistent across the full order. Price matters, but incompatibility, rework, and shipment delays can cost more than a small difference in unit price.
Confirm the Required Tag Technology
The buyer should first confirm whether the requirement uses RF, AM, RFID, or a nominated retail system.
Common EAS configurations include RF systems at 8.2 MHz and AM systems at 58 KHz. Bangladesh suppliers such as Retail Solution and Trimatrik publish products based on these two technologies.
The buyer should obtain the following information from the retailer or brand:
- Required technology
- Operating frequency
- Approved tag model
- EAS gate brand or model
- Detacher type
- Deactivation method
- Detection requirement
- RFID encoding requirement, when applicable
A supplier should not select the technology from a photograph alone.
Test Compatibility With the Retail Detection System
The buyer should test each sample with the exact antenna, detacher, or deactivator used by the retailer. Similar-looking tags may contain different components and may not perform in the same way.
A compatibility test should confirm:
- The gate detects the active tag.
- Detection works from several tag orientations.
- The approved detacher removes the tag.
- The tag does not damage the product during removal.
- Soft labels deactivate correctly at checkout.
- The system does not produce an unacceptable number of false alarms.
- Detection remains reliable around nearby metal or electronic equipment.
The procurement team should record the gate model, test date, sample code, and result.
Match the Tag With the Garment and Fabric
The tag must remain secure without damaging the garment. The same attachment method will not suit every product category.
Standard hard tags may work on denim, jackets, trousers, and thicker woven garments. Fine knits, lingerie, lace garments, leather products, shoes, bags, and padded clothing may require a lanyard, woven security label, or different attachment point.
The selection should consider:
- Fabric thickness
- Knit or woven structure
- Garment value
- Customer handling
- Display method
- Attachment position
- Visible pinhole risk
- Pulling or yarn damage
- Point-of-sale removal
The factory should conduct an attachment test using the actual production fabric.
Request Samples Before Bulk Production
A physical sample helps the buyer verify the tag before committing to the full order. The sample should represent the same components that will be used in bulk production.
The approval process should test:
- Shape and dimensions
- Color
- Weight
- Lock strength
- Pin quality
- Detection
- Detachment
- Garment damage
- Packaging
- Buyer markings
The factory should retain one sealed or signed approval sample. The purchase order should reference the sample code and approval date.
Review Pin Strength, Locking, and Detachment
The locking mechanism must resist unauthorized pulling while allowing trained store staff to remove the tag with the approved detacher.
The test should review:
- Pin length
- Pin diameter
- Pinhead design
- Lock type
- Pull resistance
- Sharp edges
- Corrosion risk
- Authorized removal
- Reusable performance
Reusable hard tags should be tested across repeated locking and unlocking cycles. A tag that works only once may fail during store reuse.
Confirm MOQ, Price, and Production Lead Time
Minimum Order Quantity, unit price, and production lead time should be confirmed in writing. Buyers should compare the full delivered cost instead of comparing only the listed tag price.
The quotation should include:
- Product code
- Quantity
- Unit price
- Sample charge
- Customization charge
- Pin or lanyard cost
- Packaging
- Taxes
- Transport
- Production time
- Payment terms
- Delivery location
- Quotation validity
Imported products may involve longer replenishment time. Locally manufactured products may provide better customization, but buyers should verify the actual production source.
Verify Batch Consistency and Quality Inspection
Bulk orders should match the approved sample across every carton. Internal component changes can affect detection even when the outer housing looks identical.
The inspection process should cover:
- Product appearance
- Dimensions
- Color
- Lock strength
- Pin condition
- Detection performance
- Detachment
- Quantity
- Carton marking
- Packaging strength
Garment factories should complete incoming inspection before issuing tags to the production line. Early inspection prevents large-scale removal and retagging.
What Questions Should You Ask a Security Tag Supplier?
A structured supplier questionnaire helps procurement teams compare offers on equal terms. The supplier’s ability to provide direct written answers can also indicate its technical understanding and communication quality.
Ask the following questions:
- Are you a manufacturer, importer, wholesaler, distributor, or installer?
- Where is the product manufactured?
- Which hard tag and soft label formats do you supply?
- Do you offer RF, AM, RFID, or more than one technology?
- What frequency does the proposed tag use?
- Which EAS gate models are compatible?
- Which detacher or deactivator is required?
- Can you provide a physical sample?
- Can you match a buyer-nominated sample?
- What is the Minimum Order Quantity?
- What is the sample lead time?
- What is the bulk production lead time?
- Can you customize the color, shape, pin, lanyard, or marking?
- How do you test frequency and detection?
- How do you inspect the locking mechanism?
- Can you maintain the same components for repeat orders?
- How many tags are packed in each carton?
- Do you replace defective or incompatible tags?
- Can you provide garment or retail customer references?
- What documents accompany the shipment?
- What payment terms do you offer?
- Who handles technical problems after delivery?
The buyer should request written confirmation when the order follows an international retailer’s nominated specification.
What Common Mistakes Should Buyers Avoid When Sourcing Security Tags?
Security tag problems often begin when the buyer selects a product by appearance or price. A proper sourcing process should connect the garment, tag, store equipment, sample approval, and bulk quality plan.
Common mistakes include:
- Ordering by shape alone: Two square or round tags may use different frequencies, locks, and internal components.
- Ignoring the retailer’s EAS system: A tag may look correct but fail to activate the installed antenna.
- Confusing EAS with RFID: EAS mainly supports exit detection. RFID can support item identification and inventory data when connected to compatible infrastructure.
- Skipping physical samples: Photographs cannot confirm detection, lock strength, dimensions, or fabric safety.
- Testing on the wrong fabric: A tag that works on denim may damage lingerie, knitwear, or delicate lace.
- Ignoring the detacher: Retail staff may struggle to remove a tag that does not match the checkout equipment.
- Selecting only by unit price: Low-priced tags may create detection failure, false alarms, rework, and replacement costs.
- Failing to retain an approval sample: The buyer cannot compare bulk products accurately without a controlled reference.
- Leaving approval until final packing: Late tag decisions can interrupt garment finishing and delay shipment.
- Using one tag for every product: Garments, shoes, bags, accessories, cosmetics, and packaged products may need different formats.
- Ignoring product origin: Imported tags may have different restocking and customization conditions from locally produced tags.
- Skipping repeat-order controls: A supplier may change the lock, pin, chip, coil, or housing material unless the purchase specification controls those components.
A pilot order can identify technical and operational problems before the buyer commits to the full quantity.
Why Do Garment Factories and Buying Houses Source Security Tags From Axisory?
Garment factories and buying houses source security tags from Axisory when they need bulk accessory supply aligned with garment production schedules. Axisory serves B2B buyers and focuses on production-ready security alarm tags rather than consumer sales or complete retail gate installations.
Axisory supplies:
- Round security tags
- Fish tags
- Square tags
- Lanyard tags
- Super tags
- Custom specification support
- Sample matching
- Bulk order production
- 100% pre-shipment quality inspection
- One account contact from inquiry to delivery
- Quotations within 24 hours
Axisory also supplies garment lace and handcrafted accessories. Buying houses and exporters can discuss several accessory categories with one supplier while maintaining separate specifications and approvals for each product.
The Axisory sourcing process focuses on four production requirements:
- Clear specifications: The buyer submits the tag format, quantity, garment category, attachment method, compatibility information, and required date.
- Sample approval: Axisory reviews the requirement and prepares or matches a sample before bulk production when needed.
- Bulk consistency: Production follows the approved requirement and reference sample.
- Pre-shipment inspection: Axisory checks the order before delivery to the garment factory, buying house, or exporter.
Axisory does not position itself as the lowest-priced option. The company focuses on dependable communication, product consistency, and delivery aligned with the garment production calendar.
Buyers can request a quotation by sharing:
- Required tag type
- RF, AM, or retailer-approved specification
- Order quantity
- Garment category
- Pin or lanyard requirement
- Color
- Packaging instructions
- Delivery location
- Required delivery date
Frequently Asked Questions
Who Manufactures Security Alarm Tags in Bangladesh?
Bangladesh-based manufacturers and garment accessory suppliers include Axisory, Alif Alarm Tag Bangladesh, Gen20 Solution, Nasir & Sons, and Montrims Limited. Their published capabilities differ. Buyers should verify the product model, technology, capacity, sample process, and factory location before approving a bulk order.
What Is the Difference Between RF, AM, and RFID Security Tags?
RF and AM tags work mainly with Electronic Article Surveillance gates to detect merchandise leaving a protected area. RFID tags can store item-level identity and support inventory tracking when connected to compatible readers and software. RF, AM, and RFID require different equipment and should not be used interchangeably.
Can Security Tags Be Attached During Garment Production?
Yes. Garment factories can attach approved security tags during finishing or packing. This process is known as source tagging. The factory must follow the retailer’s instructions for tag model, attachment position, testing, carton packing, and removal method.
How Can a Buyer Test Security Tag Compatibility?
The buyer should test the sample with the exact retail antenna, detacher, or deactivator. The test should measure detection from several orientations, authorized removal, false alarms, fabric safety, and performance near store fixtures. The buyer should retain the approved test sample for bulk inspection.
What Information Is Needed to Request a Bulk Quotation?
The supplier needs the tag format, technology, frequency, quantity, color, pin or lanyard type, garment category, customization, packing instruction, delivery address, and required date. A physical sample or technical data sheet should be provided when the order follows a retailer’s nominated product.
Can a Supplier Customize the Tag Shape, Color, or Locking System?
Many suppliers can customize selected shapes, colors, pins, lanyards, markings, and lock specifications for bulk orders. Customization depends on product availability, mould requirements, Minimum Order Quantity, and lead time. Buyers should approve a physical sample before production.
<script type="application/ld+json">
{
"@context": "https://schema.org",
"@type": "FAQPage",
"mainEntity": [
{
"@type": "Question",
"name": "Who Manufactures Security Alarm Tags in Bangladesh?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Bangladesh-based manufacturers and garment accessory suppliers include Axisory, Alif Alarm Tag Bangladesh, Gen20 Solution, Nasir & Sons, and Montrims Limited. Their published capabilities differ. Buyers should verify the product model, technology, production capacity, sample process, and factory location before approving a bulk order."
}
},
{
"@type": "Question",
"name": "What Is the Difference Between RF, AM, and RFID Security Tags?",
"acceptedAnswer": {
"@type": "Answer",
"text": "RF and AM tags mainly work with Electronic Article Surveillance gates to detect merchandise leaving a protected area. RFID tags can store item-level identity and support inventory tracking when connected to compatible readers and software. RF, AM, and RFID require different equipment and should not be used interchangeably."
}
},
{
"@type": "Question",
"name": "Can Security Tags Be Attached During Garment Production?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Yes. Garment factories can attach approved security tags during finishing or packing through a process known as source tagging. The factory must follow the retailer's instructions for the tag model, attachment position, testing, carton packing, and removal method."
}
},
{
"@type": "Question",
"name": "How Can a Buyer Test Security Tag Compatibility?",
"acceptedAnswer": {
"@type": "Answer",
"text": "The buyer should test the sample with the exact retail antenna, detacher, or deactivator. Testing should measure detection from several orientations, authorized removal, false alarms, fabric safety, and performance near store fixtures. The buyer should retain the approved test sample for bulk inspection."
}
},
{
"@type": "Question",
"name": "What Information Is Needed to Request a Bulk Quotation?",
"acceptedAnswer": {
"@type": "Answer",
"text": "The supplier needs the tag format, technology, frequency, quantity, color, pin or lanyard type, garment category, customization requirements, packing instructions, delivery address, and required delivery date. A physical sample or technical data sheet should be provided when the order follows a retailer's nominated product."
}
},
{
"@type": "Question",
"name": "Can a Supplier Customize the Tag Shape, Color, or Locking System?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Many suppliers can customize selected shapes, colors, pins, lanyards, markings, and locking specifications for bulk orders. Customization depends on product availability, mould requirements, Minimum Order Quantity, and lead time. Buyers should approve a physical sample before bulk production."
}
}
]
}
</script>